Series model SQ-ST-001
A straight metal channel retaining the filament. Record backing width, trim height and length.
Available construction and materials are reviewed against your requirements.
Specification & selection
Compare dimensions, select a reference and include it in your enquiry. Materials, mounting and lead time are confirmed in our quotation.
Swipe across the table to view all parameters.
| Shengquan model | Channel W | H | trim | length | Enquiry |
|---|---|---|---|---|---|
| SQ-ST-001-001 | 3 | 3 | 10 | 300 | Select |
| SQ-ST-001-002 | 3 | 3 | 15 | 500 | Select |
| SQ-ST-001-003 | 3 | 3 | 20 | 1000 | Select |
| SQ-ST-001-004 | 4 | 4 | 15 | 500 | Select |
| SQ-ST-001-005 | 4 | 4 | 20 | 1000 | Select |
| SQ-ST-001-006 | 4 | 4 | 30 | 1000 | Select |
| SQ-ST-001-007 | 5 | 5 | 15 | 500 | Select |
| SQ-ST-001-008 | 5 | 5 | 25 | 1000 | Select |
| SQ-ST-001-009 | 5 | 5 | 40 | 1000 | Select |
| SQ-ST-001-010 | 5 | 5 | 50 | 2000 | Select |
| SQ-ST-001-011 | 6 | 6 | 25 | 1000 | Select |
| SQ-ST-001-012 | 6 | 6 | 40 | 1000 | Select |
| SQ-ST-001-013 | 6 | 6 | 60 | 2000 | Select |
| SQ-ST-001-014 | 8 | 8 | 30 | 1000 | Select |
| SQ-ST-001-015 | 8 | 8 | 50 | 1000 | Select |
| SQ-ST-001-016 | 8 | 8 | 75 | 2000 | Select |
| SQ-ST-001-017 | 8 | 8 | 100 | 2000 | Select |
| SQ-ST-001-018 | 10 | 10 | 50 | 1000 | Select |
| SQ-ST-001-019 | 10 | 10 | 80 | 2000 | Select |
| SQ-ST-001-020 | 10 | 10 | 100 | 2000 | Select |
Overall height = channel height + trim. Confirm channel profile and holder fit; sizes do not indicate stock availability.
Send your drawing, measured dimensions and quantity.
Specification checklist
Send a dimensioned drawing, or clear photos with measurements. Keep overall dimensions separate from the working brush area.
Specify the workpiece, residue, moisture, cleaning agents and operating temperature. Material suitability depends on the actual contact conditions.
Agree critical dimensions, the sample review method, quantity and packing before batch production. Any material documentation or special testing should be specified in the enquiry.
See the manufacturing review process →Your selected brush will be included in the enquiry.
